Pin Coat Rack

The Pin Coat Rack is a freestanding coat stand made entirely of solid wood. Its form takes its cue from a dressmaker's pins: slender turned rods cross and converge at a central solid wood hub, then open again toward the top, each ending in a rounded head.

The heads are shaped and sized to hold coats, jackets and bags without stretching or marking the fabric. Seen from above, the rods fan out in a star; seen from the side, the crossing lines give the stand a light, graphic presence in an entrance, a bedroom or a dressing space.

The Pin Coat Rack is offered in walnut (with or without knots), oak (with or without knots) and natural cedar. In the natural cedar finish, it can also be used outdoors, on a covered terrace or by a pool; outside, the cedar turns grey over time, as described in the cedar wood information below.

The coat rack is delivered fully assembled and cannot be disassembled. Please consider the size of doors, stairs and elevators along the delivery route.

Review Cedar Wood Information

Note that cedar wood products are typically shipped in wooden crates for protection during transport. In most cases, one or more screws will be used to secure the piece to the crate at the base. These screws can simply be removed when unpacking.

The small screw holes that may remain are not a defect in production, do not compromise the structural integrity of the product, and do not cause or contribute to cracking. They are part of the standard safety method used to stabilize the item during shipment.

For this reason, these screw points are not considered damage and cannot be used as the basis for a claim.

27.2" Ø x 65" H